Latest News Headlines

RoscoLED Tape Illuminates CANADA 150

RoscoLED Tape Illuminates CANADA 150
RoscoLED Tape Illuminates CANADA 150

Canada - Canada celebrated the 150th anniversary of its founding on 1st July, 2017. To mark this historic event, several illuminated, 3D “CANADA 150” installations were on display in each Provincial Capital and major city across the land. From Victoria, British Columbia to St. John’s, Newfoundland and from breathtaking Niagara Falls to the Nation’s Capital, Ottawa – the 36ft long by 6ft high CANADA 150 signs are a part of every Canadian’s sesquicentennial celebration.

The project, which was initiated by Heritage Canada and Tourism Industry Association of Canada (TIAC), once again brought together the working collaboration of Unit 11 Custom Inc. and TAD Lighting Services – the same team that worked to bring the Iconic TORONTO sign that continues to adorn the City Hall environ at Nathan Philips Square in Toronto.

Designed by Don Loughlin of Unit 11 Custom Inc., each of the CANADA 150 characters contain between two and five 5M Reels of RoscoLED VariColor tape. The LED ribbon is mounted at 4” centres on Coroplast boards which are then attached in the centre of the letters/numbers, back-to-back to illuminate the frosted polycarbonate placed on both the front and rear surfaces.

RoscoLED tape is mounted to Coroplast boards

Each letter/number is mounted on a 2’ high by 3’ deep Marine Grade plywood base. These bases not only provide weight and stability, but they also house all of the needed RoscoLED Power Supplies and DMX Decoders, as well as provide a secure pathway for the power and data wiring to control and illuminate the signage characters.

Once all of the RoscoLED tape, power supplies and DMX decoders were secured and tested, they were passed on to the teams at Unit 11 who completed the signs in their shop as they installed the LEDs inside their aluminium framed and Alupanel clad letters and numbers.

Each of the characters is assigned its own DMX address, allowing colour and intensity control of the individual letters/numbers. The lighting-control of each CANADA 150 sign is provided by an Apple iPad running the Luminair lighting app. This enables each installation to program the colour scheme and configure the schedule and sequences for each location’s individual needs.

Most installations feature a red and white combination that is run at full during the daylight hours. The signs scroll through other colours and the LEDs are reduced to half-power in the evenings so they don’t flare-out the thousands of pictures being taken at each location.

As the signs were shipped to each location, one member of the TAD Lighting team was on-hand to oversee the installation, make all of the wiring connections and act as liaison with the local electrical contractors charged with getting power to the sign. Fully illuminated an entire sign draws a total of 18.5 amps.

As memorable as all the locations were, some installations stand out more than others. The Niagara Falls sign, for example, is positioned on Table Rock with the stunning Horseshoe Falls in the background. The illuminated Falls provide an effervescent backdrop for the CANADA 150 sign.

RoscoLED Tape Illuminates CANADA 150RoscoLED Tape Illuminates CANADA 150

20th December 2017

© 1999 - 2024 ET Press Ltd News Stories